MIC2568-1YSM-TR Overview
It is packaged in the form of a Tape & Reel (TR).It is included with the 28-SSOP (0.209, 5.30mm Width) package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is PCMCIA Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 4 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.As you can see, it comes from the MIC2568 family.During operation, the 28 pins are used.It is important to note that the LED driving board has 1 functions.From the lighting driver, there is a maximum output of 120mAV.To comply with the operation criteria, the maximum output current is reduced to 120mA.This LED driver is equipped with a total of 28 pins.It is included in the -- series.The LED driver is packaged in an econtainer with a capacity of Switch ICs.The maximum supply voltage for this lighting driver is set to 5.5 V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 3 V.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.A total of 1 channels are available for you to choose from.It is designed to be stable at 85°C°C, which is the maximum operating temperature.The LED driver must work at a minimum temperature of -40°C degrees Celsius in order to remain reliable.In addition, ALSO OPERATE FROM 4.5 TO 5.5V can be produced using this LED driving board.
MIC2568-1YSM-TR Features
1 channels
Additional features like ALSO OPERATE FROM 4.5 TO 5.5V
MIC2568-1YSM-TR Applications
There are a lot of Microchip Technology
MIC2568-1YSM-TR Power Switches ICs applications.
- Wireless/Networking Cards
- Low Voltage I/O System Power
- Hard Disk Drives
- Solid-State Drives
- Hot Swap
- HDD and SSD
- Hot Swap
- Wireless Modem Data Cards
- PC Cards
- HDD, SSD