5-Pin MIC2775 Voltage supervisor -- Series 1 Channels Min 1.5V Max 5.5V
Tape & Reel (TR)-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. The power management belongs to the PMIC - Power Management ICs subcategory. A total of 5 pins are located on this power management. 5 pins are present on the power management system. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.5V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management recommends the Surface Mount mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Complementary of output voltage. For this power management, there is an 3.5 uA volt supply current. Additionally, IC management are a variety of features, for example [0], to name a few. There are other types of IC included in the power managment ic, such as types POWER SUPPLY SUPPORT CIRCUIT. To find similar IC managements from the manufacturer, you can always search by MIC2775. As you can see, this IC power comes from the well-known -- series of products. The power management has 5 terminals.