MIC2791H-04VMT-T5 Overview
There are 6 terminals on this power management that allow it to be mounted. A Tape & Reel (TR) package is used to package the power management. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. In this PMIC, you can find 6-UFDFN Exposed Pad functions for your reference. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. In a 3.3V supply voltage, the power management conducts. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts IC management. There are 6 pins on the power managment ic. There should be a minimum voltage supply (Vsup) of 1.5V for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~125°C TJ. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. There is a supply current of 50μA for the power management. Power management is also possible to add other features such as THRESHOLD VOLTAGE=0.4 V to name a few. You can always use MIC2791, the base supervisor number, to search for similar PMICs of the manufacturer.
MIC2791H-04VMT-T5 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.5V
50μA operating supply current
MIC2791H-04VMT-T5 Applications
There are a lot of Microchip Technology
MIC2791H-04VMT-T5 Voltage Supervisors applications.
- Power distribution systems of infant care room
- Power distribution systems of ICU
- Power distribution systems of CCU
- emergency room
- Medical-specific isolation transformer
- Medical-specific insulation monitor
- Transformer load monitoring equipment
- External alarm
- Display equipment
- DC stabilized power supply module