-- Fixed 2.31 mm MIC2920A-3.3 PMIC -- Series 3 TO-261-4, TO-261AA

Deliveries are in Tape & Reel (TR) cases. The package is in a TO-261-4, TO-261AA case. Basically, the voltage regulator chip is made up of 4 terminations. In this case, Fixed represents the output type of the Voltage Regulated IC. This part implements 1 regulator ICs, which can be found in the following table. Regulator IC varies the range of Surface Mount operating temperatures. The Voltage Regulated IC operates at a temperature of -40°C~125°C degrees, which is its operating temperature. It is configured for output function Positive on this regulator. There is an output current of 400mA on this regulator. The total number of pins in the regulator is 3. This IC regulator has a total of 1 outputs, which ensures a rapid, adequate performance when in use. There is a voltage dropout of 10 volts for this IC regulator. Several pins on the chip are 3-shaped. As an FYI, this IC voltage regulator has the basic part number MIC2920A-3.3. An example of this type of component would be a PMIC - Power Management ICs component. A Low Dropout Voltage regulator is the type of regulator that is used for this device. It operates in the 140µA Quiescent Current state. As part of the -- Series, this IC voltage regulator belongs to that category. As far as tolerances are concerned, this IC regulator has 3 % tolerance.