Enable Adjustable 1.702 mm MIC2941A PMIC -- Series 5 TO-263-6, D2Pak (5 Leads + Tab), TO-263BA

Deliveries are in Tape & Reel (TR) cases. The package is in a TO-263-6, D2Pak (5 Leads + Tab), TO-263BA case. In this case, Adjustable represents the output type of the Voltage Regulated IC. This part implements 1 regulator ICs, which can be found in the following table. Regulator IC varies the range of Surface Mount operating temperatures. The Voltage Regulated IC operates at a temperature of -40°C~125°C degrees, which is its operating temperature. It is configured for output function Positive on this regulator. There is an output current of 1.25A on this regulator. The total number of pins in the regulator is 5. This IC regulator has a total of 1 outputs, which ensures a rapid, adequate performance when in use. There is a voltage dropout of 10 volts for this IC regulator. Several pins on the chip are 5-shaped. As an FYI, this IC voltage regulator has the basic part number MIC2941A. An example of this type of component would be a PMIC - Power Management ICs component. A Low Dropout Voltage regulator is the type of regulator that is used for this device. The maximal output current reaches 1.2A to meet the operating requirements. It operates in the 500μA Quiescent Current state. As part of the -- Series, this IC voltage regulator belongs to that category. Whenever the temperature is less than 125°C, it is recommended that you use it. The chip is operated at a maximum operating temperature of -40°C. As far as tolerances are concerned, this IC regulator has 2.5 % tolerance.