Enable Fixed 0.5 mm MIC61150 PMIC -- Series 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad

In a Tape & Reel (TR) case, the IC voltage regulator is delivered. A 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad case contains the Liner IC. This PMIC chip has an output type of Fixed. In this electrical part, there are 1 regulators that are implemented. Voltage Regulated IC Surface Mount varies its operating temperature range. The IC Voltage Regulator's operating temperature is -40°C~85°C degrees. Currently, this regulator IC has an output function configured as Positive as its output function. The current output of this IC regulator is 1.5A. Featuring 1 outputs in total, this voltage regulator IC enables prompt, sufficient performance regardless of the application. There is a 10 volt dropout voltage on this transistor. A 10-pin is present on the chip. It is MIC61150 for this voltage regulator IC, just for your information. I would describe this component as a typical PMIC - Power Management ICs component. In this case, the regulator type is FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR, which corresponds to this voltage regulator IC. A packing method for the IC regulator is TR, which means it is packed in a certain way. A maximum output current of 1.5A is required to meet the operation requirements. In fact, it is voltage regulator IC of the -- Series of cameras. When the temperature is below 85°C, you are advised to use the voltage regulator IC. The chip's operating temperature cannot be lowered below -40°C.