MIC6211YM5-TR Overview
It is packaged in an SC-74A, SOT-753-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. In total, the buffer amplifier consists of 5 pins. Op amp ic rates 7mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. A supply current of 1.3mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 104.61dB. This op amp ic has 1 circuits. There are a total of 1 channels available on the op amps. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. There are 1 elements in this buffer amplifier. For optimal performance, this electrical part should be connected to a supply with a current of 1.3mA. It is important to keep in mind that the power supply voltage of this electric component is below 32V, which is suitable. Keeping the linear amplifier's supply voltage above 4V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 16V volts. Buffer op amp series numbers are indicated by the IttyBitty®. The linear amplifier has 1 amplifiers.
MIC6211YM5-TR Features
104.61dB voltage gain
MIC6211YM5-TR Applications
There are a lot of Microchip Technology
MIC6211YM5-TR Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering