3.5KB 2K x 14 OTP PIC 8-Bit Microcontroller PIC® 12C Series PIC12C672 8 Pin 4MHz 5V 8-DIP (0.300, 7.62mm)
Packaged in a 8-DIP (0.300, 7.62mm) format. A total of 5 I/Os are on the Microcontroller. Through Hole is the mounting type of the Microcontroller that is attached to the panel. This Microcontroller is based on a core called 8-Bit. The type of its program memory is OTP. In this Microcontroller, temperature is controlled within the range -40°C~85°C TA. A PIC® 12C series electrical component is used in this application. This program has a program memory of 3.5KB 2K x 14 bytes, which is the size of the program. With a PIC Core Processor, Microcontroller is fast and efficient. ICs for MICROCONTROLLER, RISC uPs/uCs/peripheral parts. There are 8 terminations on the IC chip, which means there are 8 terminations on the integrated circuit chip. In addition, MCU chip comes with a 8-bit size. Microcontroller chip has outputs of 5V volts. The system has NO channels for DMA communication. There is 3.5kB memory size assigned to the part. Alternatives can be found by searching through the base part number PIC12C672 to find them. At a frequency of 4MHz, Microcontroller can operate efficiently. This MCU Chip uses NO PWM channels to operate. Chips have 8 pins. There are 1 timers/counters in this device. In total, it has 8 pins. The PIC CPU family is embedded in the device, so it can handle a wide range of operations. The equipment has a OTP memory that is built in. It is equipped with a PIC core architecture which is integrated into it. In the 5 Programmable I/O section, it can be programmed in many different ways. It has 8 channels that can be accessed through UART. It consists of 4 channels in total for the ADC. This device comes with a set of 1 A/D converters that have been built into it. An integrated circuit with 8 bits has a total of 8 bits. 0 channels of I2C have been incorporated into the design of the part.