768B 512 x 12 FLASH PIC 8-Bit Microcontroller PIC® 12F Series PIC12F508 8 Pin 4MHz 2.5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package is included. In total, it has 5 inputs and outputs. This Microcontroller is mounted using the Surface Mount mounting type. Powered by the 8-Bit core, it offers a wide range of capabilities. The type of memory that the program uses is FLASH. The temperature range of this Microcontroller is within the range of -40°C~85°C TA. PIC® 12F series components belong to this electrical component. Its program memory size is 768B 512 x 12. There is a PIC Core Processor inside MCU that provides this device with its power. MICROCONTROLLER, RISC uPs, uCs, and peripheral ICs make up the Microcontroller. Microcontroller is known that the chip has 8 terminations in total. The part works on a 8-bit basis. An output voltage of 2.5V volts is available for this Microcontroller chip. The Microcontroller chip has NO DMA channels. 768B memory size belongs to the part. PIC12F508 is the base part number that you can use to find alternatives. A good performance can be achieved at a frequency of 4MHz, as long as it is operated at a low power consumption. In order for the device to work with the motor, it utilizes the PWM channel NO. On the chip, there are 8 pins that are accessible. A total of 1 timers/counters are included in the package. A total of 8 pins are present. Devices based on the PIC series of CPUs are embedded in the device. This 8 Programmable I/O section allows you to program the device in many different ways depending on what you need.