1.75KB 1K x 14 FLASH PIC 8-Bit Microcontroller PIC® 12F Series PIC12F615 8 Pin 20MHz 5V 8-DIP (0.300, 7.62mm)
There is a 8-DIP (0.300, 7.62mm) package available. The board has 5 I/Os. Using the Mounting Type Through Hole, the MCU is mounted on PCB. A 8-Bit core is used in order to power the IC chip. The type of memory it uses for its program is FLASH. -40°C~85°C TA is the temperature range at which this Microcontroller operates. PIC® 12F-series components are electrical components. In the case of this Microcontroller, the memory size of the program is 1.75KB 1K x 14. Powered by a PIC Core processor. Microcontroller's a MICROCONTROLLER, RISC uPs/uCs/Peripheral IC. IC Chip terminations are 8. As a result, this Microcontroller comes with a 8-bit size. Input voltage for the chip is 5V volts. A total of NO DMA channels are available. This IC part has a memory size of 1.8kB. There are a number of alternatives to the base part number PIC12F615 that you can find. Performing well when operated at frequency 20MHz can be achieved. On the chip, there are 8 pins that can be accessed. It comes with 3 timers/counters that can be set up. The pins counted are 8. The device is powered by the the PIC CPU family that is embedded in it. In addition, it has 8 UART channels to choose from. The device has a total of 4 ADC channels in total. There are 1 A/D converters built into the device, which makes it quite versatile. There are 2 PWM channels used by the device in total. A total of 0 I2C channels have been integrated into the part.