1.75KB 1K x 14 FLASH PIC 8-Bit Microcontroller PIC® 12F Series PIC12F615 8 Pin 20MHz 5V 8-VDFN Exposed Pad
A 8-VDFN Exposed Pad package is included. In total, it has 5 inputs and outputs. This Microcontroller is mounted using the Surface Mount mounting type. Powered by the 8-Bit core, it offers a wide range of capabilities. The type of memory that the program uses is FLASH. The temperature range of this Microcontroller is within the range of -40°C~85°C TA. PIC® 12F series components belong to this electrical component. Its program memory size is 1.75KB 1K x 14. There is a PIC Core Processor inside MCU that provides this device with its power. MICROCONTROLLER, RISC uPs, uCs, and peripheral ICs make up the Microcontroller. Microcontroller is known that the chip has 8 terminations in total. The part works on a 8-bit basis. An output voltage of 5V volts is available for this Microcontroller chip. The Microcontroller chip has NO DMA channels. 1.8kB memory size belongs to the part. PIC12F615 is the base part number that you can use to find alternatives. A good performance can be achieved at a frequency of 20MHz, as long as it is operated at a low power consumption. In order for the device to work with the motor, it utilizes the PWM channel YES. On the chip, there are 8 pins that are accessible. A total of 3 timers/counters are included in the package. A total of 8 pins are present. Devices based on the PIC series of CPUs are embedded in the device. There's built-in FLASH memory in the equipment. It is built on a PIC core architecture. This 8 Programmable I/O section allows you to program the device in many different ways depending on what you need. In total, there are 4 Channel channels for the ADC on this board.