14KB 8K x 14 OTP PIC 8-Bit Microcontroller PIC® 16C Series PIC16C745 28 Pin 24MHz 5V 28-DIP (0.300, 7.62mm)
A 28-DIP (0.300, 7.62mm) package is included. In total, it has 22 inputs and outputs. This Microcontroller is mounted using the Through Hole mounting type. Powered by the 8-Bit core, it offers a wide range of capabilities. The type of memory that the program uses is OTP. The temperature range of this Microcontroller is within the range of -40°C~85°C TA. PIC® 16C series components belong to this electrical component. Its program memory size is 14KB 8K x 14. There is a PIC Core Processor inside MCU that provides this device with its power. MICROCONTROLLER, RISC uPs, uCs, and peripheral ICs make up the Microcontroller. Microcontroller is known that the chip has 28 terminations in total. The part works on a 8-bit basis. An output voltage of 5V volts is available for this Microcontroller chip. The Microcontroller chip has NO DMA channels. 14kB memory size belongs to the part. PIC16C745 is the base part number that you can use to find alternatives. A good performance can be achieved at a frequency of 24MHz, as long as it is operated at a low power consumption. On the chip, there are 28 pins that are accessible. A total of 3 timers/counters are included in the package. A total of 28 pins are present. Devices based on the PIC series of CPUs are embedded in the device. There's built-in EPROM, OTP memory in the equipment. The device has 0 UART channels. In total, there are 5 channels for the ADC on this board. 8 bits are found on a chip. A total of 2 PWM channels are used by the device. Devices like this use an 0-channel PWM controller.