3.5KB 2K x 14 FLASH PIC 8-Bit Microcontroller PIC® 16F Series PIC16F1503 14 Pin 20MHz 2.5V 14-TSSOP (0.173, 4.40mm Width)
Packaged in a 14-TSSOP (0.173, 4.40mm Width) format. A total of 11 I/Os are on the Microcontroller. Surface Mount is the mounting type of the Microcontroller that is attached to the panel. This Microcontroller is based on a core called 8-Bit. The type of its program memory is FLASH. In this Microcontroller, temperature is controlled within the range -40°C~125°C TA. A PIC® 16F series electrical component is used in this application. This program has a program memory of 3.5KB 2K x 14 bytes, which is the size of the program. With a PIC Core Processor, Microcontroller is fast and efficient. ICs for MICROCONTROLLER, RISC uPs/uCs/peripheral parts. There are 14 terminations on the IC chip, which means there are 14 terminations on the integrated circuit chip. In addition, MCU chip comes with a 8-bit size. Microcontroller chip has outputs of 2.5V volts. The system has NO channels for DMA communication. There is 3.5kB memory size assigned to the part. Alternatives can be found by searching through the base part number PIC16F1503 to find them. At a frequency of 20MHz, Microcontroller can operate efficiently. This MCU Chip uses YES PWM channels to operate. Chips have 14 pins. There are 3 timers/counters in this device. In total, it has 14 pins. The PIC CPU family is embedded in the device, so it can handle a wide range of operations. In the 12 Programmable I/O section, it can be programmed in many different ways. It has 8 channels that can be accessed through UART. It consists of 8 channels in total for the ADC. 1 channels of I2C have been incorporated into the design of the part.