14KB 8K x 14 FLASH PIC 8-Bit Microcontroller PIC® XLP™ mTouch™ 16F Series PIC16F1847 18 Pin 32MHz 3V 20-SSOP (0.209, 5.30mm Width)

Packaged in a 20-SSOP (0.209, 5.30mm Width) format. A total of 15 I/Os are on the Microcontroller. Surface Mount is the mounting type of the Microcontroller that is attached to the panel. This Microcontroller is based on a core called 8-Bit. The type of its program memory is FLASH. In this Microcontroller, temperature is controlled within the range -40°C~85°C TA. A PIC® XLP™ mTouch™ 16F series electrical component is used in this application. This program has a program memory of 14KB 8K x 14 bytes, which is the size of the program. With a PIC Core Processor, Microcontroller is fast and efficient. ICs for MICROCONTROLLER, RISC uPs/uCs/peripheral parts. There are 20 terminations on the IC chip, which means there are 20 terminations on the integrated circuit chip. In addition, MCU chip comes with a 8-bit size. Microcontroller chip has outputs of 3V volts. The system has NO channels for DMA communication. There is 14kB memory size assigned to the part. Alternatives can be found by searching through the base part number PIC16F1847 to find them. At a frequency of 32MHz, Microcontroller can operate efficiently. This MCU Chip uses YES PWM channels to operate. Chips have 18 pins. There are 5 timers/counters in this device. In total, it has 20 pins. The equipment has a FLASH memory that is built in. It is equipped with a PIC core architecture which is integrated into it. In the 15 Programmable I/O section, it can be programmed in many different ways. As an example, one of the additional features that you can use is 1.8 V MINIMUM SUPPLY AT 16 MHZ. It consists of 12 Channel channels in total for the ADC. As part of the part, 1 serial I/Os have been incorporated. In addition to the internal interrupts, the part includes 1 external interrupts.