28KB 16K x 14 FLASH PIC 8-Bit Microcontroller PIC® XLP™ 16F Series PIC16F1938 28 Pin 32MHz 3.3V 28-UFQFN Exposed Pad

The package is in 28-UFQFN Exposed Pad format. The MCU has 25 I/O ports. There is a mounting type Surface Mount associated with this Microcontroller. This Microcontroller is based on the 8-Bit core. There is a memory type of FLASH in its program memory. The temperature range that this Microcontroller operates at is -40°C~85°C TA. The electrical component that you are looking at belongs to the PIC® XLP™ 16F series of components. Microcontroller has abundant program memory size of 28KB 16K x 14. The PIC Core Processor powers the device and is one of its key features. This Microcontroller belongs to the MICROCONTROLLER, RISC uPs/uCs/peripheral ICs type. During the manufacture of the IC chip, there is a number 28 of terminations. A 8-bit operation is performed by this part. There is an output of 3.3V volts from the Microcontroller chip. A total of NO DMA channels are available on MCU chip. This MCU is implemented with 28kB memory. PIC16F1938 serves as a base part number to find alternatives. It exhibits good efficiency when it operates at a frequency of 32MHz and it is able to operate at a high frequency. It is possible for the device to work with the motor using the PWM channel YES. It is possible to access the 28 pins on the chip through the 28 pins. It is equipped with 5 timers and counters. It consists of 28 pins. As far as the CPU is concerned, it is embedded with the the PIC family of processors. There's an integrated FLASH memory in the equipment. There is a PIC core architecture integrated into it. Among the eight programmable I/O sections, there are many different ways in which it can be programmed. The device features 8 UART channels. There are a total of 11 channels for the ADC on this board, so it has a total of 11 channels. In this device, there's an 1-channel PWM controller.