768B 512 x 12 FLASH PIC 8-Bit Microcontroller PIC® 16F Series PIC16F54 18 Pin 20MHz 3V 18-SOIC (0.295, 7.50mm Width)

Packaged in a 18-SOIC (0.295, 7.50mm Width) format. A total of 12 I/Os are on the Microcontroller. Surface Mount is the mounting type of the Microcontroller that is attached to the panel. This Microcontroller is based on a core called 8-Bit. The type of its program memory is FLASH. In this Microcontroller, temperature is controlled within the range -40°C~125°C TA. A PIC® 16F series electrical component is used in this application. This program has a program memory of 768B 512 x 12 bytes, which is the size of the program. With a PIC Core Processor, Microcontroller is fast and efficient. ICs for MICROCONTROLLER, RISC uPs/uCs/peripheral parts. There are 18 terminations on the IC chip, which means there are 18 terminations on the integrated circuit chip. In addition, MCU chip comes with a 8-bit size. Microcontroller chip has outputs of 3V volts. The system has NO channels for DMA communication. There is 768B memory size assigned to the part. Alternatives can be found by searching through the base part number PIC16F54 to find them. At a frequency of 20MHz, Microcontroller can operate efficiently. This MCU Chip uses NO PWM channels to operate. Chips have 18 pins. There are 1 timers/counters in this device. In total, it has 18 pins. The PIC CPU family is embedded in the device, so it can handle a wide range of operations. The equipment has a FLASH memory that is built in. It is equipped with a PIC core architecture which is integrated into it. In the 12 Programmable I/O section, it can be programmed in many different ways. As an example, one of the additional features that you can use is OPERATES AT 2 V MINIMUM SUPPLY @ 4 MHZ.