1.75KB 1K x 14 FLASH PIC 8-Bit Microcontroller PIC® 16F Series PIC16F610 14 Pin 20MHz 5V 14-SOIC (0.154, 3.90mm Width)
The package is in 14-SOIC (0.154, 3.90mm Width) format. The MCU has 11 I/O ports. There is a mounting type Surface Mount associated with this Microcontroller. This Microcontroller is based on the 8-Bit core. There is a memory type of FLASH in its program memory. The temperature range that this Microcontroller operates at is -40°C~85°C TA. The electrical component that you are looking at belongs to the PIC® 16F series of components. Microcontroller has abundant program memory size of 1.75KB 1K x 14. The PIC Core Processor powers the device and is one of its key features. This Microcontroller belongs to the MICROCONTROLLER, RISC uPs/uCs/peripheral ICs type. During the manufacture of the IC chip, there is a number 14 of terminations. A 8-bit operation is performed by this part. There is an output of 5V volts from the Microcontroller chip. A total of NO DMA channels are available on MCU chip. This MCU is implemented with 1.8kB memory. PIC16F610 serves as a base part number to find alternatives. It exhibits good efficiency when it operates at a frequency of 20MHz and it is able to operate at a high frequency. It is possible for the device to work with the motor using the PWM channel YES. It is possible to access the 14 pins on the chip through the 14 pins. It is equipped with 2 timers and counters. It consists of 14 pins. As far as the CPU is concerned, it is embedded with the the PIC family of processors. The device features 8 UART channels. An entire chip has 8 bits. In this device, there's an 0-channel PWM controller.