14KB 8K x 14 FLASH PIC 8-Bit Microcontroller PIC® 16F Series PIC16F886 28 Pin 20MHz 5V 28-VQFN Exposed Pad
A 28-VQFN Exposed Pad package is included. In total, it has 24 inputs and outputs. This Microcontroller is mounted using the Surface Mount mounting type. Powered by the 8-Bit core, it offers a wide range of capabilities. The type of memory that the program uses is FLASH. The temperature range of this Microcontroller is within the range of -40°C~85°C TA. PIC® 16F series components belong to this electrical component. Its program memory size is 14KB 8K x 14. There is a PIC Core Processor inside MCU that provides this device with its power. MICROCONTROLLER, RISC uPs, uCs, and peripheral ICs make up the Microcontroller. Microcontroller is known that the chip has 28 terminations in total. The part works on a 8-bit basis. An output voltage of 5V volts is available for this Microcontroller chip. The Microcontroller chip has NO DMA channels. 14kB memory size belongs to the part. PIC16F886 is the base part number that you can use to find alternatives. A good performance can be achieved at a frequency of 20MHz, as long as it is operated at a low power consumption. In order for the device to work with the motor, it utilizes the PWM channel YES. On the chip, there are 28 pins that are accessible. A total of 3 timers/counters are included in the package. A total of 28 pins are present. Devices based on the PIC series of CPUs are embedded in the device. The device has 0 UART channels. In total, there are 11 channels for the ADC on this board. 8 bits are found on a chip. Devices like this use an 1-channel PWM controller.