7KB 4K x 14 FLASH PIC 8-Bit Microcontroller PIC® 16F Series PIC16LF873A 28 Pin 20MHz 5V 28-DIP (0.300, 7.62mm)
Packaged in a 28-DIP (0.300, 7.62mm) format. A total of 22 I/Os are on the Microcontroller. Through Hole is the mounting type of the Microcontroller that is attached to the panel. This Microcontroller is based on a core called 8-Bit. The type of its program memory is FLASH. In this Microcontroller, temperature is controlled within the range -40°C~85°C TA. A PIC® 16F series electrical component is used in this application. This program has a program memory of 7KB 4K x 14 bytes, which is the size of the program. With a PIC Core Processor, Microcontroller is fast and efficient. ICs for MICROCONTROLLER, RISC uPs/uCs/peripheral parts. There are 28 terminations on the IC chip, which means there are 28 terminations on the integrated circuit chip. In addition, MCU chip comes with a 8-bit size. Microcontroller chip has outputs of 5V volts. The system has NO channels for DMA communication. Alternatives can be found by searching through the base part number PIC16LF873A to find them. At a frequency of 20MHz, Microcontroller can operate efficiently. Chips have 28 pins. There are 1 timers/counters in this device. In total, it has 28 pins. The PIC CPU family is embedded in the device, so it can handle a wide range of operations. The equipment has a EPROM, FLASH memory that is built in. It has 8 channels that can be accessed through UART. It consists of 5 channels in total for the ADC. An integrated circuit with 8 bits has a total of 8 bits. This device uses 2 PWM channels to generate the voltage. 1 channels of I2C have been incorporated into the design of the part.