16KB 8K x 16 OTP PIC 8-Bit Microcontroller PIC® 17C Series PIC17C44 40 Pin 16MHz 5V 40-DIP (0.600, 15.24mm)
Packaged in a 40-DIP (0.600, 15.24mm) format. A total of 33 I/Os are on the Microcontroller. Through Hole is the mounting type of the Microcontroller that is attached to the panel. This Microcontroller is based on a core called 8-Bit. The type of its program memory is OTP. In this Microcontroller, temperature is controlled within the range 0°C~70°C TA. A PIC® 17C series electrical component is used in this application. This program has a program memory of 16KB 8K x 16 bytes, which is the size of the program. With a PIC Core Processor, Microcontroller is fast and efficient. ICs for MICROCONTROLLER, RISC uPs/uCs/peripheral parts. There are 40 terminations on the IC chip, which means there are 40 terminations on the integrated circuit chip. In addition, MCU chip comes with a 8-bit size. Microcontroller chip has outputs of 5V volts. The system has NO channels for DMA communication. There is 16kB memory size assigned to the part. Alternatives can be found by searching through the base part number PIC17C44 to find them. At a frequency of 16MHz, Microcontroller can operate efficiently. Chips have 40 pins. There are 4 timers/counters in this device. In total, it has 40 pins. The PIC CPU family is embedded in the device, so it can handle a wide range of operations. The equipment has a OTP memory that is built in. It is equipped with a PIC core architecture which is integrated into it. In the 33 Programmable I/O section, it can be programmed in many different ways. It has 8 channels that can be accessed through UART. An integrated circuit with 8 bits has a total of 8 bits. This device uses 2 PWM channels to generate the voltage.