8KB 4K x 16 FLASH PIC 8-Bit Microcontroller PIC® 18F Series PIC18F4321 44 Pin 40MHz 5V 44-TQFP
Packaged in a 44-TQFP format. A total of 36 I/Os are on the Microcontroller. Surface Mount is the mounting type of the Microcontroller that is attached to the panel. This Microcontroller is based on a core called 8-Bit. The type of its program memory is FLASH. In this Microcontroller, temperature is controlled within the range -40°C~85°C TA. A PIC® 18F series electrical component is used in this application. This program has a program memory of 8KB 4K x 16 bytes, which is the size of the program. With a PIC Core Processor, Microcontroller is fast and efficient. ICs for MICROCONTROLLER uPs/uCs/peripheral parts. There are 44 terminations on the IC chip, which means there are 44 terminations on the integrated circuit chip. In addition, MCU chip comes with a 8-bit size. Microcontroller chip has outputs of 5V volts. The system has NO channels for DMA communication. There is 8kB memory size assigned to the part. Alternatives can be found by searching through the base part number PIC18F4321 to find them. At a frequency of 40MHz, Microcontroller can operate efficiently. Chips have 44 pins. There are 4 timers/counters in this device. In total, it has 44 pins. The PIC CPU family is embedded in the device, so it can handle a wide range of operations. It has 8 channels that can be accessed through UART. It consists of 13 channels in total for the ADC. This device comes with a set of 1 A/D converters that have been built into it. An integrated circuit with 8 bits has a total of 8 bits. This device uses 5 PWM channels to generate the voltage. 1 channels of I2C have been incorporated into the design of the part.