8KB 4K x 16 FLASH PIC 8-Bit Microcontroller PIC® XLP™ 18K Series PIC18F43K22 40 Pin 48MHz 5V 40-UFQFN Exposed Pad
Packaged in a 40-UFQFN Exposed Pad format. A total of 35 I/Os are on the Microcontroller. Surface Mount is the mounting type of the Microcontroller that is attached to the panel. This Microcontroller is based on a core called 8-Bit. The type of its program memory is FLASH. In this Microcontroller, temperature is controlled within the range -40°C~125°C TA. A PIC® XLP™ 18K series electrical component is used in this application. This program has a program memory of 8KB 4K x 16 bytes, which is the size of the program. With a PIC Core Processor, Microcontroller is fast and efficient. ICs for MICROCONTROLLER, RISC uPs/uCs/peripheral parts. There are 40 terminations on the IC chip, which means there are 40 terminations on the integrated circuit chip. In addition, MCU chip comes with a 8-bit size. Microcontroller chip has outputs of 5V volts. The system has NO channels for DMA communication. There is 8kB memory size assigned to the part. Alternatives can be found by searching through the base part number PIC18F43K22 to find them. At a frequency of 48MHz, Microcontroller can operate efficiently. This MCU Chip uses YES PWM channels to operate. Chips have 40 pins. There are 7 timers/counters in this device. In total, it has 40 pins. The PIC CPU family is embedded in the device, so it can handle a wide range of operations. The equipment has a FLASH memory that is built in. It is equipped with a PIC core architecture which is integrated into it. In the 36 Programmable I/O section, it can be programmed in many different ways. As an example, one of the additional features that you can use is ALSO OPERATES 2.3V MINIMUM SUPPLY AT 16 MHZ.