48KB 24K x 16 FLASH PIC 8-Bit Microcontroller PIC® 18F Series PIC18F4585 44 Pin 40MHz 5V 44-VQFN Exposed Pad
The package is in 44-VQFN Exposed Pad format. The MCU has 36 I/O ports. There is a mounting type Surface Mount associated with this Microcontroller. This Microcontroller is based on the 8-Bit core. There is a memory type of FLASH in its program memory. The temperature range that this Microcontroller operates at is -40°C~85°C TA. The electrical component that you are looking at belongs to the PIC® 18F series of components. Microcontroller has abundant program memory size of 48KB 24K x 16. The PIC Core Processor powers the device and is one of its key features. This Microcontroller belongs to the MICROCONTROLLER, RISC uPs/uCs/peripheral ICs type. During the manufacture of the IC chip, there is a number 44 of terminations. A 8-bit operation is performed by this part. There is an output of 5V volts from the Microcontroller chip. A total of NO DMA channels are available on MCU chip. This MCU is implemented with 48kB memory. PIC18F4585 serves as a base part number to find alternatives. It exhibits good efficiency when it operates at a frequency of 40MHz and it is able to operate at a high frequency. It is possible for the device to work with the motor using the PWM channel YES. It is possible to access the 44 pins on the chip through the 44 pins. It is equipped with 4 timers and counters. It consists of 44 pins. As far as the CPU is concerned, it is embedded with the the PIC family of processors. There are a total of 11 channels for the ADC on this board, so it has a total of 11 channels. In this device, there's an 1-channel PWM controller.