128KB 64K x 16 FLASH PIC 8-Bit Microcontroller PIC® 18F Series PIC18F8720 80 Pin 25MHz 5V 80-TQFP
Packaged in a 80-TQFP format. A total of 68 I/Os are on the Microcontroller. Surface Mount is the mounting type of the Microcontroller that is attached to the panel. This Microcontroller is based on a core called 8-Bit. The type of its program memory is FLASH. In this Microcontroller, temperature is controlled within the range -40°C~125°C TA. A PIC® 18F series electrical component is used in this application. This program has a program memory of 128KB 64K x 16 bytes, which is the size of the program. With a PIC Core Processor, Microcontroller is fast and efficient. ICs for MICROCONTROLLER, RISC uPs/uCs/peripheral parts. There are 80 terminations on the IC chip, which means there are 80 terminations on the integrated circuit chip. In addition, MCU chip comes with a 8-bit size. Microcontroller chip has outputs of 5V volts. The system has NO channels for DMA communication. There is 128kB memory size assigned to the part. Alternatives can be found by searching through the base part number PIC18F8720 to find them. At a frequency of 25MHz, Microcontroller can operate efficiently. This MCU Chip uses YES PWM channels to operate. Chips have 80 pins. There are 5 timers/counters in this device. In total, it has 80 pins. The PIC CPU family is embedded in the device, so it can handle a wide range of operations. The equipment has a FLASH memory that is built in. It is equipped with a PIC core architecture which is integrated into it. In the 68 Programmable I/O section, it can be programmed in many different ways. It consists of 16 Channel channels in total for the ADC.