128KB 64K x 16 FLASH PIC 8-Bit Microcontroller PIC® 18J Series PIC18F87J50 80 Pin 48MHz 3V 80-TQFP

A 80-TQFP package is included. In total, it has 65 inputs and outputs. This Microcontroller is mounted using the Surface Mount mounting type. Powered by the 8-Bit core, it offers a wide range of capabilities. The type of memory that the program uses is FLASH. The temperature range of this Microcontroller is within the range of -40°C~85°C TA. PIC® 18J series components belong to this electrical component. Its program memory size is 128KB 64K x 16. There is a PIC Core Processor inside MCU that provides this device with its power. MICROCONTROLLER uPs, uCs, and peripheral ICs make up the Microcontroller. Microcontroller is known that the chip has 80 terminations in total. The part works on a 8-bit basis. An output voltage of 3V volts is available for this Microcontroller chip. The Microcontroller chip has NO DMA channels. 128kB memory size belongs to the part. PIC18F87J50 is the base part number that you can use to find alternatives. A good performance can be achieved at a frequency of 48MHz, as long as it is operated at a low power consumption. On the chip, there are 80 pins that are accessible. A total of 5 timers/counters are included in the package. A total of 80 pins are present. Devices based on the PIC series of CPUs are embedded in the device. This 8 Programmable I/O section allows you to program the device in many different ways depending on what you need. The device has 2 UART channels. In total, there are 12 channels for the ADC on this board. The Microcontroller has 1 A/D converters. 8 bits are found on a chip. A total of 14 PWM channels are used by the device. Devices like this use an 2-channel PWM controller.