SN65LVDS100DRG4 Overview
Packaged in 8-SOIC (0.154, 3.90mm Width) for power buffer easy transportation.The package is ready for power buffer in Tape & Reel (TR) pieces.Easily adaptable Surface Mount universal mouthpiece.As for types, this is your typical Buffer, ReDriver.The op amp buffer works at 3V~3.6V voltage.CML, LVDS, LVPECL input can be accommodated.To avoid malfunctioning, the operating temperature should be set to -40°C~85°C.Get more pin-to-pin solutions by searching with "65LVDS100".There are 8 terminals on the op amp buffer that you can find.Reflow temperature is 260 at its peak.When powered by 3.3V voltage, this splitter is capable of carrying out a number of demanding tasks.Power buffer pinouts start from 8 pins.Output is expressed in LVDS.With 8 pins, it is connected.This board has a Surface Mount hole for mounting on a PCB or other board.Using 30mA as a voltage, this power buffer operates.It is necessary for 3.3V operating supply voltage to function normally.There is a 1-Bit receiver used in it.At most, this splitter dissipates 481mW watts of power.A 1 element interface repeater signal such as this is used.There should be a 12μA output from the spliter at the moment.
SN65LVDS100DRG4 Features
1-Bit receiver.
SN65LVDS100DRG4 Applications
There are a lot of Texas Instruments
SN65LVDS100DRG4 Signal Buffers, Repeaters, Splitters applications.
- Protection Switching
- Loopback
- Clock Distribution
- Servers
- Industrial PCs
- Test Equipment
- Desktop Computers
- Laptop Computers (for External Video Cards)
- Communications Switchers
- Storage Area Networks