SN65LVDS101D Overview

To make transportation easier, the power buffer is packaged in a 8-SOIC (0.154, 3.90mm Width).Packaged in Tube and ready for power buffer.An easy-to-adapt universal mount.A Buffer, ReDriver is a typical type.For its operation, this op amp buffer uses a voltage of 3V~3.6V.This facilitates CML, LVDS, LVPECL input.If you want to avoid malfunction, set the operating temperature to -40°C~85°C.For more pin-to-pin solutions, try "65LVDS101".On the op amp buffer, you will find 8 terminals.There is a peak reflow temperature of 260 for this power buffer.3.3V voltage provides the splitter with the power it needs to handle a wide range of demanding tasks.This power buffer has 8 pins as its pinout.As a result, it outputs in LVPECL.The 8 pins are on it.A Surface Mount hole is available for mounting it on a PCB or another board.In addition to the power buffer, other Line Driver or Receivers also play an important role.In order for this power buffer to operate, a voltage of 30mA must be applied.It is necessary to supply voltage 3.3V for normal operation.The receiver is 1-Bit-based.In the most extreme case, this splitter dissipates 481mW watts.The splitter should operate at 50mA nominal supply current under normal circumstances.1 elements are used to interface with this repeater signal.The spliter's current output is 12μA.

SN65LVDS101D Features

A standard Line Driver or Receivers.
1-Bit receiver.

SN65LVDS101D Applications

There are a lot of Texas Instruments
SN65LVDS101D Signal Buffers, Repeaters, Splitters applications.

• Digital Crossconnects
• Network Switches/Routers
• Backplane Interconnect
• Clock Distribution
• Protection Switching
• Loopback
• Clock Distribution
• Servers
• Industrial PCs
• Test Equipment