SN65LVDS105PWG4 Overview
There is a package of 16-TSSOP (0.173, 4.40mm Width) for easy transportation of this power buffer.Currently, this power buffer is available for shipping in Tube packages.The Surface Mount universal mout allows for easy adaptability to a variety of situations.It is important to note that this is a typical Buffer, Multiplexer type.The op amp buffer uses a voltage of 3V~3.6V volts for its operation.In order to maintain the output quality, 1 x 1:4 channels cooperate with each other.As a result, LVTTL input can be facilitated.There should be a setting of -40°C~85°C for the operating temperature in order to avoid any malfunctions.There are more pin-to-pin solutions available for your special needs if you search with the letter "65LVDS105".There is a 16 terminal on the op amp buffer, which can be seen in the picture below.During reflow, it reaches a peak temperature of 260.Powered by 3.3V voltage, the splitter can be used to accomplish a wide variety of demanding tasks.The pinout of a Power buffer begins with the 16 pins of the Power buffer that it possesses.There is a LVDS output from it.16 pins are present on the op amp buffers.For mounting on PCBs or other boards, it has a Surface Mount.A voltage of 23mA is required to operate this power buffer.Operating voltage 3.3V is required for normal operation.Using a 1-Bit receiver, it transmits and receives data.It dissipates a maximum of 774mW watts of power.A nominal supply current of 23mA is recommended for normal operation of the splitter.There are a total of 4 outputs supported.
SN65LVDS105PWG4 Features
1 x 1:4 channels.
1-Bit receiver.
4 outputs.
SN65LVDS105PWG4 Applications
There are a lot of Texas Instruments
SN65LVDS105PWG4 Signal Buffers, Repeaters, Splitters applications.
- PECL-to-LVDS Translation
- Cellular Phone Base Stations
- Add/Drop Muxes
- Digital Crossconnects
- Network Switches/Routers
- Backplane Interconnect
- Clock Distribution
- Protection Switching
- Loopback
- Clock Distribution