Surface Mount Tube 3.3V V 115mA μA Signal Buffers, Repeaters, Splitters 3V~3.6V V 4.7 ns ns 5pF pF 64
Packaging is convenient because power buffer comes in 64-TFSOP (0.240, 6.10mm Width).Power buffer is ready to ship in a package of Tube.A universal mount that's easy to adapt.Type-wise, this is a Buffer, Multiplexer.To operate, this op amp buffer needs 3V~3.6V voltage.In order to maintain a high standard of output, 1 x 1:16 channels cooperate together.There is no input provided by it.It is recommended to set the operating temperature to -40°C~85°C to avoid any malfunctions.With "65LVDS116," you will find more pin-to-pin solutions.An op amp buffer with 64 terminals can be found on the left side of the op amp buffer.The peak reflow temperature of it is 260.3.3V voltage enables the splitter to handle a wide range of demanding tasks.It is important to note that the pinout of the Power buffer starts from the 64 pins that it has.64 pins are included in it.In addition to the Surface Mount axis, it has a female hole for mounting to PCBs or other boards.It operates at a voltage of 115mA.The voltage required for normal operation is 3.3V.The repeter utilizes a 1-Bit receiver.There is a maximum power dissipation of 2.094W for this splitter.When using the splitter normaly, the nominal supply current should be 115mA.In total, there are 16 outputs supported.