SN65LVDS17DRFT Overview
To make transportation easier, the power buffer is packaged in a 8-WFDFN Exposed Pad.Packaged in Tape & Reel (TR) and ready for power buffer.An easy-to-adapt universal mount.A Buffer, ReDriver is a typical type.For its operation, this op amp buffer uses a voltage of 2.375V~3.6V.This facilitates PECL input.If you want to avoid malfunction, set the operating temperature to -40°C~85°C.For more pin-to-pin solutions, try "65LVDS17".On the op amp buffer, you will find 8 terminals.There is a peak reflow temperature of 260 for this power buffer.2.5V voltage provides the splitter with the power it needs to handle a wide range of demanding tasks.This power buffer has 8 pins as its pinout.As a result, it outputs in LVDS.The 8 pins are on it.A Surface Mount hole is available for mounting it on a PCB or another board.In order for this power buffer to operate, a voltage of 48mA must be applied.It is necessary to supply voltage 3.3V for normal operation.In the most extreme case, this splitter dissipates 132mW watts.The splitter should operate at 40mA nominal supply current under normal circumstances.A 1 receiver is implemented in this repeater signal.
SN65LVDS17DRFT Features
SN65LVDS17DRFT Applications
There are a lot of Texas Instruments
SN65LVDS17DRFT Signal Buffers, Repeaters, Splitters applications.
- Digital Crossconnects
- Network Switches/Routers
- Backplane Interconnect
- Clock Distribution
- Protection Switching
- Loopback
- Clock Distribution
- Servers
- Industrial PCs
- Test Equipment