Surface Mount Tape & Reel (TR) 2.5V V Signal Buffers, Repeaters, Splitters 2.375V~3.6V V 400μA mA 630 ps ns 8
To make transportation easier, the power buffer is packaged in a 8-WFDFN Exposed Pad.Packaged in Tape & Reel (TR) and ready for power buffer.An easy-to-adapt universal mount.A Buffer, ReDriver is a typical type.For its operation, this op amp buffer uses a voltage of 2.375V~3.6V.This facilitates Differential input.If you want to avoid malfunction, set the operating temperature to -40°C~85°C.Application-specific operational amplifier buffers such as this one are targeted at LVDS and other markets.For more pin-to-pin solutions, try "65LVDS20".There is a peak reflow temperature of 260 for this power buffer.2.5V voltage provides the splitter with the power it needs to handle a wide range of demanding tasks.This power buffer has 8 pins as its pinout.The 8 pins are on it.There are 35mA op amp buffers in it.A Surface Mount hole is available for mounting it on a PCB or another board.Power supplies from 2.5/3.3V are sufficient for the repeters to run.The splitter should operate at 45mA nominal supply current under normal circumstances.The spliter's current output is 400μA.The video signal spliter contains 1 drivers.