SN65LVDT101D Overview
Packaged in 8-SOIC (0.154, 3.90mm Width) for power buffer easy transportation.The package is ready for power buffer in Tube pieces.Easily adaptable Surface Mount universal mouthpiece.As for types, this is your typical Buffer, ReDriver.The op amp buffer works at 3V~3.6V voltage.CML, LVDS, LVPECL input can be accommodated.To avoid malfunctioning, the operating temperature should be set to -40°C~85°C.Get more pin-to-pin solutions by searching with "65LVDT101".There are 8 terminals on the op amp buffer that you can find.Reflow temperature is 260 at its peak.When powered by 3.3V voltage, this splitter is capable of carrying out a number of demanding tasks.Power buffer pinouts start from 8 pins.Output is expressed in LVPECL.With 8 pins, it is connected.This board has a Surface Mount hole for mounting on a PCB or other board.Using 61mA as a voltage, this power buffer operates.It is necessary for 3.3V operating supply voltage to function normally.There is a 1-Bit receiver used in it.At most, this splitter dissipates 481mW watts of power.Splitters should be powered by 50mA-volts under normal conditions.A 1 element interface repeater signal such as this is used.There should be a 12μA output from the spliter at the moment.
SN65LVDT101D Features
1-Bit receiver.
SN65LVDT101D Applications
There are a lot of Texas Instruments
SN65LVDT101D Signal Buffers, Repeaters, Splitters applications.
- Protection Switching
- Loopback
- Clock Distribution
- Servers
- Industrial PCs
- Test Equipment
- Desktop Computers
- Laptop Computers (for External Video Cards)
- Communications Switchers
- Storage Area Networks