SN65LVDT125ADBTG4 Overview
Providing this information in the TSSOP enables digital switch board space to be saved.The package is in the form of Rail/Tube.There is a design for terminating 38 as part of its basic configuration.The multiplexer's system works with 3.3V voltage.In this turn signal switch, there are 38 component pins.Conductors terminate at GULL WING in this design.The supply type of this multiplexer ic is Single.This multiplexer ic is configured with 38 pins.It is positioned in the direction of Surface Mount.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 3.3V.A total of 4 channels are used for transmission in the turn signal switch's circuit.85°C is an acceptable maximum temperature for this signal switch.A temperature of the multiplexer of -40°C should be maintained for minimal operation.Based on the device specifications, the signal switches is designed to operate at 3.6V maximum supply voltage.A minimum supply voltage of 3V is specified for the digital swith by its applicable specification.The analog IC used by the digital switch is CROSS POINT SWITCH.
SN65LVDT125ADBTG4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
CROSS POINT SWITCH as the analog IC
SN65LVDT125ADBTG4 Applications
There are a lot of Texas Instruments
SN65LVDT125ADBTG4 Signal Switches / Multiplexers / Decoders applications.
- Time division multiplexing system
- Frequency multiplexing system
- A/D converters
- D/A converters
- Implementing boolean functions with multiple variables
- Data collection system
- Audio transmission
- Video transmission
- Image transmission
- Recording transmission
