1 Circuit 2.9GHz 3.3V 1:2 Clock Buffer DUAL 65LVEL11 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is available for the cut smart buffer. In case Tape & Reel (TR), the cut smart buffer is available. Normal operation has a maximum value of 2.9GHz. A total of 8 terminations have been found in it. The supply voltage of 3.3V is capable of providing high efficiency. If this is the case, it will be mounted as Surface Mount. This electronic part is classified as Fanout Buffer (Distribution). If you wish to ensure reliable performance, you should set the temperature to -40°C~85°C. In general, it should be able to work with a power source of 3V~3.8V volts. On this board, there is a pin count of 8. Buffer IC is ECL, PECL that is output. In order for the timeing clock to operate, it is connected to the 8 pins. The structure belongs to the 65LVEL11 family of structures. A voltage higher than 3V is necessary for normal operation of the system. By default, the output of the circuit clock is set to 4. There is a +-3.3V volt supply that powers the timeing clock. It is based on the TR packing method.