SN65MLVD047ADRG4 Overview
This driver chip is excellent for driving common LEDs due to its enhanced SOIC package.The package of this receiver is Tape and Reel.Driver ICs in this category can operate efficiently with a supply voltage range of 3.3V.Wide receiver has 16 terminations built in for driving or receiving signals from data.As a standard package, this transceiver comes with a 16-pin layout that follows the market standard.16-pin driver IC with improved power dissipation control.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.It provided a 4-bit resolution capability with this ic receiver.There is a voltage input supply of 3.3V required for the operation of this integrated circuit.It must be below 85°C when the transceiver module's system is operating.This optical transceiver must be able to operate at a minimum of -40°C degrees Celsius during normal operation.To power the ic receiver, sufficient current but not more than 70mA should be supplied to its VCC pin.It is rated at a transceiver's maximum supply voltage of 3.6V, which is higher than most ICs.In ic receiver, the interface IC type used for managing and controlling information sharing is LINE DRIVER.It is recommended that this line driver ic be powered by a voltage of 3V.It contains 4 elements that can handle multiple tasks at once.
SN65MLVD047ADRG4 Features
Tape and Reel package
16 pin count
16 pins
4 elements
SN65MLVD047ADRG4 Applications
There are a lot of Texas Instruments
SN65MLVD047ADRG4 Drivers/Receivers/Transceivers applications.
- Cordless telephone
- Desktop PC
- Notebook
- Pocket PC
- Desktop radio
- Clock radio
- Tuner
- Portable radio
- Car radio
- Satellite radio receiver