5V V SST39 MPF™ 32 Pin Memory IC SST39 MPF™ Series SST39SF040 4 Mb kb 12.4mm mm 25mA mA 8b b

As far as its memory type goes, it falls into the Non-Volatile category. You can get memory ics in a Tray case. 32-TFSOP (0.488, 12.40mm Width) case encloses it. There is 4Mb 512K x 8 of memory on the chip. The device uses a mainstream FLASH-format memory. Suitable for use in a wide range of demanding applications, this device offers an extended operating temperature range of 0°C~70°C TA. There is a voltage range of 4.5V~5.5V for the supply voltage. It is recommended that the mounting type be Surface Mount. There are 32 terminations on the chip. There are 1 functions supported by this part as part of the comprehensive working process. The memory device is designed to be supplied with an 5V volt power supply in order to operate properly. It has a clock frequency of -. When choosing similar parts, SST39SF040 is frequently referred to as the device's base part number. In this ic memory chip, there is an 32-pin package that encloses the device. It is worth noting that this memory device has 32 pins, which indicates it has 32 memory locations. This memory chip has an operating supply voltage of 5V. As far as the nominal supply current of this memory component is concerned, it is rated at 25mA. As for the power supply, this memory chip only needs 5V . This part is part of the SST39 MPF™ series of memory devices, which play a key role in its target applications. Memory ics must operate at a temperature of at least 0 °C. Temperatures over 70 °C°C are not recommended. The programming voltage required for certain nonvolatile memory arrays is 5V. There is a common misconception that this component is a type of Memory & Data Storage. If this part is to be used, the minimum supply voltage should not be less than 4.5 V volts. The operating voltage of the memory ics shall not exceed 5.5 V. There are 128 specific divisions in this ic memory chip, and each division has a specific size. Maximum current is 25mA .