1 | 10 | 100 | 1000 | 2500 | Updated | ||||
---|---|---|---|---|---|---|---|---|---|
* | TPS16630RGER | 0 | USD | 2.38875 | 3.44400 | 2.82150 | |||
* | TPS16632RGET | 0 | USD | 4.60000 | 4.13200 | 3.38570 | |||
* | TPS16630RGET | 0 | USD | 4.60000 | 4.13200 | 3.38570 | |||
* | TPS16630PWPT | 0 | USD | 4.60000 | 4.13200 | 3.38570 | |||
* | TPS16630PWPR | 0 | USD | 2.38875 | 3.44400 | 2.82150 | |||
* | TPS16530RGER | 0 | USD | 2.06500 | 2.97700 | 2.43910 | |||
* | TPS16530PWPR | 0 | USD | 2.18925 | 3.15600 | 2.58580 | |||
* | TPS16632RGER | 0 | USD | ||||||
* | TPS16630-32EVM | 2 | USD | 118.80000 | |||||
* | TPS1653EVM | 4 | USD | 118.80000 | |||||
* | TPS161616 | 181 | USD | 6.35 | |||||
* | TPS16632RGET | 10635 | USD | ||||||
* | TPS16630RGET | 6315 | USD | ||||||
* | TPS16630RGER | 220 | USD | ||||||
* | TPS16630PWPR | 12075 | USD | ||||||
* | TPS16630PWPT | 9152 | USD | ||||||
* | TPS16630PWPT | 9152 | USD | ||||||
* | TPS16632RGER | 209 | USD | ||||||
* | TPS1641 | 0 | |||||||
* | TPS1653 | 0 | |||||||
* | TPS1663 | 0 | |||||||
* | TPS16630-32EVM | 20 | USD | ||||||
* | TPS1653EVM | 5 | USD | ||||||
* | TPS16530PWPR | 1 | USD | ||||||
* | TPS16530RGER | 8509 | USD | ||||||
* | TPS1653EVM | 6 | USD | ||||||
* | TPS16630RGER | 3258 | USD | ||||||
* | TPS16632RGER | 850 | USD | ||||||
* | TPS16530PWPR | 1375 | USD | ||||||
* | TPS16530RGER | 9187 | USD |
There is an inclusion of buck boost converter in the package Tape & Reel (TR).In this case, voltage regulator has been packaged in the same way as 20-PowerTSSOP (0.173, 4.40mm Width).Surface Mount is used to mount this current regulator on the board.A maximum operating temperature of -40°C~125°C TJ should not be exceeded during operation.Voltages of 4.5V~60V can be input as input voltages in this module.There are 20 terminations, which are the practice of ending a transmission line with a voltage regulator that matches the characteristic impedance of the line.In the TPS16630 family, current regulator is a member.If a 24VV power source is used as a power source to power the constant current, it should be able to function.The output current of 6A makes it feature maximum design flexibility.POWER SUPPLY SUPPORT CIRCUIT is the analog IC in this power converter.Strong/weak growth of channels: 1.In order to ensure proper operation, the supply voltage (Vsup) must be greater than 4.5V.When the maximum supply voltage (Vsup) applied for its operation reaches 60V, the boost converter is considered to be operational.
Tape & Reel (TR) package
TPS16630 family
There are a lot of Texas Instruments TPS16630PWPT Current Regulation/Managements applications.
DC motor control
Programmable current source
Over current monitor
Battery management
Motor controls
Level translating
Engine management
DC-to-dc converters
Transmission controls
Current sensing