16 Terminals 1.8V 16-Pin TPS61030 DC DC Voltage Regulator BATTERY CHARGE CONTROLLER 1 Outputs Cut Tape (CT) 3.6A Switch 16-PowerTSSOP (0.173, 4.40mm Width)

For optimal performance, this voltage regulator makes use of the Cut Tape (CT) package. In this voltage regulator, there are a total of 16 terminations. There is one type of analog IC that this voltage regulator is equipped with, and that is the BATTERY CHARGE CONTROLLER type. In order to save space, this harley voltage regulator is available in the 16-PowerTSSOP (0.173, 4.40mm Width) package. There are 1 outputs configured on this voltage regulator 12v. There are output pins on this DC DC switching regulator that generate Adjustable output. Surface Mount-mounting is compatible with this switching regulator. The operating temperature should be kept at -40°C~85°C TA when the voltage regulator 12v is in operation. The voltage regulator can operate with a dc to dc voltage regulator's minimum input voltage of 1.8V. It features maximum design flexibility due to dc to dc voltage regulator's 3.6A Switch output current. 260 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 2.4V. The TPS61030 family of DC/DC regulators includes this DC/DC regulator. The voltage DC DC switching regulator can produce is 5.5V volts. There are 16 pins that are used for the operation of the voltage regulator 12v. There should be at least a 1.8V volt output voltage for this switching regulator in order to make it work properly. The maximum output current reaches 1A A to meet the switching regulator operation requirements. The maximum output voltage of this regulator voltage is 5.5V. 5.5V is the supply voltage for this DC-DC switching regulator. Despite external influences, voltage regulator consumes 20μA A of quiescent current. With a frequency of 600kHz, dc to dc voltage regulator maintains high accuracy.