TPS61059DRCTG4 Overview

There are 1 outputs used for the design of this LED drivers.It operates based on the frequency of 750kHz.10 terminations are designed for its operation.There are 10 pins used to form the base of its configuration.The supply voltage of 5.5V is an acceptable maximum value.The voltage at the output terminal is 5.5V.It is equipped with 10 pin count.It operates with the minimal input voltage of 2.7V.It works with the minimal supply voltage of 2.7V to meet highest efficiency standards.The allowable maximum value of supply current reaches 5.5V.In order to ensure stable operation, the operating temperature should not exceed 85°C.The operating temperature should be higher than -40°C so as to realize stable operation.It is capable of delivering all benefits of a LED driver when operating with the maximal output current of 800mA.5.5mA current is consumed in the case of no external factors.The output voltage should not be in excess of 5.5V.There are 3.6V volts assigned to the circuit when operating the device.There is a current of 800mA can be supplied to the load.The minimal voltage it outputs maintains at 2.5V.It is equipped with the output type of Adjustable.SWITCHING REGULATOR is the analog IC that this device employs.

TPS61059DRCTG4 Features

Frequency of 750kHz

TPS61059DRCTG4 Applications

There are a lot of Texas Instruments
TPS61059DRCTG4 LED Driver ICs applications.

• General lighting
• Down lighting
• Architectural lighting
• Street lighting
• Stage and Studio lighting
• Refrigeration lighting
• Portable lighting
• Gallery lighting
• Museum lighting
• High-end retail lighting