TPS61062DRBRG4 Overview
LED drivers design with 1 outputs.A frequency of 1.2MHz is used to operate it.The operation of this system is supported by 8 terminations.This configuration is built upon 8 pins.5 segments are present.There is no maximum value acceptable for the supply voltage, so 6V is acceptable.Its output voltage is 24V.The device has a pin count of 8.With 2.7V as the minimal input voltage, it operates.A minimal supply voltage of 2.7V is required for it to achieve the highest efficiency.The maximum supply current is 6V.The operating temperature should not exceed 85°C to ensure stable operation.It is necessary to maintain a higher operating temperature than -40°C in order to achieve stable operation.When operating at the maximum output current of 60mA, it is capable of providing all the benefits associated with LED drivers.There is no external factor that can consume current, so 1mA current is consumed.IC LED DISPLAY DRIVER is used on this part as an interface IC.Keep the part's output current at 60mA volts.
TPS61062DRBRG4 Features
Frequency of 1.2MHz
Supply voltage of 3.6V
TPS61062DRBRG4 Applications
There are a lot of Texas Instruments
TPS61062DRBRG4 LED Driver ICs applications.
- Gallery lighting
- Museum lighting
- High-end retail lighting
- Medical surgery lighting
- Replacement lamps
- Panel lighting
- Down lights
- Linear fluorescent
- A- lamps
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
