0.5mm PMIC TPS61141 10 Pin 1.2MHz 10-VFDFN Exposed Pad
Using its 10-VFDFN Exposed Pad package, it is possible to save board space. LED drivers design with 2 outputs.This mounting method is Surface Mount.The system emerges as a DC DC Regulator with high efficiency.It is capable of working normally at -40°C~85°C TA.Backlight has considerable advantages.A frequency of 1.2MHz is used to operate it.The operation of this system is supported by 10 terminations.This configuration is built upon 10 pins.4 segments are present.The LED driver is available under the part number TPS61141.There is no maximum value acceptable for the supply voltage, so 6V is acceptable.The device has a pin count of 10.With 2.5V as the minimal input voltage, it operates.A minimal supply voltage of 2.5V is required for it to achieve the highest efficiency.The maximum supply current is 6V.It is possible to provide high efficiency when the maximal supply current is less than 2mA.23mA is the maximum amount of current that can be supplied to the load.When operating at the maximum output current of 23mA, it is capable of providing all the benefits associated with LED drivers.There is no external factor that can consume current, so 125μA current is consumed.There shouldn't be an increase in output voltage over 27V.When the device is operated, 3.6V volts are applied to the circuit.The voltage it outputs stays at 2.5V.This LED driver is also characterized by the number PFM TECHNIQUE IS ALSO POSSIBLE.