0.5mm PMIC TPS61150 10 Pin 1.2MHz 3.6V 10-VFDFN Exposed Pad
The 10-VFDFN Exposed Pad package is used for saving board space. LED drivers with this design have 2 outputs.For mounting, it uses the Surface Mount method.It emerges as a DC DC Regulator, which is efficient and reliable.The led light driver is capable of operating at the operating temperature of -40°C~85°C TA.There are considerable benefits for Backlight.1.2MHz is the frequency in which it operates.There are 10 terminations that are designed to operate with it.The configuration of the board is built around 10 pins.Segments counted are 14.It is under the base part number TPS61150 that you can find this LED driver.6V is a maximum acceptable voltage for the supply.There are 10 pins on it.A minimal input voltage of 3V is required for it to operate.A minimum supply voltage of 2.5V is required to meet the highest efficiency standards.6V is the maximum value of the supply current.It is capable of delivering high efficiency when the maximal supply current is below 2mA.It is possible to supply the load with 45mA current.At maximum output current 35mA, it will deliver all the benefits of a LED driver.There is no external factor that consumes current when there is 2mA current consumption.Voltages above 27V should not be allowed.2.5V is the minimal voltage it outputs.