TPS61202DSCRG4 Overview
Embark on a journey with package Tape & Reel (TR).Voltage regulator supports up to 1 outputs in total.It has 10-shaped pins.A voltage output of 5 V allows it to be used for a diverse range of applications.To operate this regulator, you must supply voltage ≥ 300 mV.Voltage regulators like this can use a voltage as high as 5.5 V.Fixed output regulator controller.There should be an output of 600 mA from the DC DC Switching Regulator at this time.An idle current of 50 µA is displayed by the regulator controller.Current 600 mA is designed to be produced at maximum capacity.It can output a voltage of 5 V at its lowest setting.The temperature should not be lower than -40 °C.There is no recommendation for use at temperatures higher than 85 °C.There is a maximum voltage output of 5 V voltage that this voltage regulator can provide.
TPS61202DSCRG4 Features
1 outputs
Quiescent Current: 50 µA
TPS61202DSCRG4 Applications
There are a lot of Texas Instruments
TPS61202DSCRG4 Linear Regulator Controllers applications.
- High-current, current-limited switch
- Dual/Triple Power Supplies
- Desknotes and Notebooks
- Graphic Cards
- Ultra-Low-Dropout
- Voltage Regulators
- Low-Voltage DSP Power Supplies
- Microcontroller Power Supplies
- Motherboards
- Battery Operating Equipment
