10 Terminals 10-Pin DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 850kHz 800mA VSSOP

During the development of this harley voltage regulator, 10 terminations were made. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. The harley voltage regulator is available as a VSSOP package to save space. The voltage regulator is configured with 1 outputs. As you can see, this DC DC switching regulator generates Fixed output on its output pins. DC-DC switching regulators reach 850kHz switching frequencies. Featuring a 800mA output current, dc to dc voltage regulator offers maximum design flexibility. This voltage regulator's peak reflow temperature is so high as to make it virtually indestructible. For operation, voltage regulator provides a nominal input voltage of 7.2V. At 1.8V volts, voltage regulator can provide voltage. To operate the voltage regulator 12v, 10 pins are required. The output voltage of this voltage regulator 12v should at least be set at 1.8V volts at all times. Accordingly, dc to dc voltage regulator's maximum output current is 800mA A. A maximum voltage of 1.8V can be obtained from the regulator voltage. Switching regulators such as this operate from voltages of 10V. Voltage regulator consumes 12μA A of quiescent current without being affected by outside forces. Adding the ALSO HAS CONTROL TECHNIQUE OF PFM feature improves this switching regulator's efficiency and stability. In order to ensure switching regulator's stable operation, the maximum operating temperature 85°C is set at a high level. For reliable operation, switching regulator operates at -40°C degrees Celsius. The dc to dc voltage regulator's input voltage must be at least 2.7V in order to work. At its maximum, this DC-DC switching regulator can sustain a 10V input voltage. DC-DC switching regulator with 10 pins. There is a 1.8V voltage output on the voltage regulator 12v.