-40°C~105°C TA Adjustable 0.95mm PMIC TS2431 1 Channel TO-236-3, SC-59, SOT-23-3

There is a handy package TO-236-3, SC-59, SOT-23-3 used in this program.Shunt control is used to control the part as a voltage reference.An external package of Tape & Reel (TR) encloses the voltage reference ic.Terminations with various functions 3.Voltage measurements with a tolerance of ±1%.An analog IC TWO TERMINAL VOLTAGE REFERENCE is coupled to the voltage reference ic.The output voltage 24V is determined by test statistics.The output should be 1.Input can be entered on a Adjustable form.It contains 3 pins.The temperature should not rise above 260 during reflow soldering.Pins 3 are settled in the part.If you are designing a PCB that requires a high level of precision, Surface Mount is available.Within -40°C~105°C TA range of work.The search term "TS2431" will return other relevant parts.Applicable to Surface Mount applications.The voltage reference ic cannot output more current than 100mA in this case.It is possible to communicate at high quality through 1 channels.The maximum output voltage of this voltage reference ic is 24V.Cathode currents should be 1mA in most cases.Its lowest output voltage is 2.5V.In view of the part's maximum input voltage of 25V, users are advised to confine the voltage accordingly.Could the voltage reference circuit contain Substances of Very High Concern (SVHC)?A voltage reference outputs a voltage of 24V regardless of external conditions.As shown in the record, the voltage reference circuit requires at least 2.5V voltage to run.