14 Terminals 14-Pin DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 700kHz

The switching controller fits in the PDIP package and is ideal for most applications. dc motor controller is suitable for 1 output generation. With this switching controller, you can switch at 700kHz. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. There are a terminal (s) on the switching converters that are designed at DUAL. 14 terminations with various dc switching's functions. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The DC switcher's nominal voltage is 11V. Total pins of switching converter are 14. It is recommended to use 9.6V as the minimum input voltage of dc dc voltage regulator. The duty cycle of the voltage regulator dc to dc can be set to 100 % on power-up or power-down to ensure reliability. Having a Through Hole makes DC switcher suitable for most application and prototype designs. There is 700kHz frequency setting on the switching controller. At 0°C and above, dc regulator should be kept. At a temperature around 70°C degrees Celsius, dc regulator should be running. Overall, the switch converters contains 1 function(s). Voltage regulators switching is designed with 14 pins. There is a maximum frequency of 700kHz that can be switched by the controller. A 100mA input is ideal for this application. This process outputs a value of 400mV for normalworking processes. When it comes to maximum supply voltage, switching voltage regulators is rated 15V.