10 Terminals 3.8V DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs Up to 4MHz Cut Tape (CT) 10-VFDFN Exposed Pad

It is designed to provide optimal performance by utilizing the Cut Tape (CT) package. There are 10 terminations in this harley voltage regulator. As this regulator voltage is equipped with an analog IC of the type SWITCHING REGULATOR, it is a SWITCHING REGULATOR-type voltage regulator. For space-saving purposes, this voltage regulator is available in the 10-VFDFN Exposed Pad package. A total of 1 outputs are configured in this voltage regulator. On the output pins of this DC DC switching regulator, there is a Adjustable output generated. Surface Mount-mount switching regulator. -40°C~125°C TJ should be the operating temperature when voltage regulator is operating. Voltage regulator's switching frequency reaches Up to 4MHz. The voltage regulator can be operated with a voltage as low as 3.8V as an input voltage. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 0.8V. With its peak reflow temperature of 260, this voltage regulator is essentially indestructible. To meet the operation requirements, voltage regulator is designed to provide 12V as the nominal input voltage. Voltage can be produced at 30V volts by voltage regulator. In order to use this voltage regulator 12v at its full potential, the output voltage should be kept at at least 800mV. A maximum output current of 2.5A A is available to meet the switching regulator operation requirements. On the basis of 30V's maximal output voltage, DC DC switching regulator can be operated easily. The maximum voltage of voltage regulator 12v DC DC switching regulator can produce is 30V, which is the highest available. An input voltage of 36V is used to operate this harley voltage regulator. DC-DC switching regulators operate with 100μA supply currents.