10 Terminals 3.8V 10-Pin DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs Up to 4MHz Tape & Reel (TR) 10-VFDFN Exposed Pad

It uses the Tape & Reel (TR) package in order to optimize the performance of this voltage regulator. During the development of this harley voltage regulator, 10 terminations were made. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. The harley voltage regulator is available as a 10-VFDFN Exposed Pad package to save space. The voltage regulator is configured with 1 outputs. As you can see, this DC DC switching regulator generates Adjustable output on its output pins. A Surface Mount mounting is required for this switching regulator. Voltage regulators should be operated at -40°C~125°C TJ temperature while operating. DC-DC switching regulators reach Up to 4MHz switching frequencies. Despite its low input voltage, this voltage regulator can operate. In this adjusting voltage regulator, the output voltage (Min/Fixed) equates to 0.8V. This voltage regulator's peak reflow temperature is so high as to make it virtually indestructible. For operation, voltage regulator provides a nominal input voltage of 12V. At 30V volts, voltage regulator can provide voltage. To operate the voltage regulator 12v, 10 pins are required. The output voltage of this voltage regulator 12v should at least be set at 800mV volts at all times. Accordingly, dc to dc voltage regulator's maximum output current is 2.5A A. By using 30V as the maximum output voltage, adjusting voltage regulator is easy to operate. A maximum voltage of 30V can be obtained from the regulator voltage. Switching regulators such as this operate from voltages of 36V.